Sitemap  |  Contact  |  Home  |  中文  |  CAS  |  Director’s Email
International Cooperation
Education & Training
Societies & Publications
Chinese Journal of Acoustics
 
 
  Location:Home>Resources>Popularization of scientific knowledge
How Ethernet Works:Limitations of Ethernet
Author:
ArticleSource:
Update time: 2014/03/10
Viewed:
Close
Text Size: A A A
Print

 

Limitations of Ethernet

A single shared cable can serve as the basis for a complete Ethernet network, which is what we discussed above. However, there are practical limits to the size of our Ethernet network in this case. A primary concern is the length of the shared cable.

Electrical signals propagate along a cable very quickly, but they weaken as they travel, and electrical interference from neighboring devices (fluorescent lights, for example) can scramble the signal. A network cable must be short enough that devices at opposite ends can receive each other's signals clearly and with minimal delay. This places a distance limitation on the maximum separation between two devices (called the network diameter) on an Ethernet network. Additionally, since in CSMA/CD only a single device can transmit at a given time, there are practical limits to the number of devices that can coexist in a single network. Attach too many devices to one shared segment and contention for the medium will increase. Every device may have to wait an inordinately long time before getting a chance to transmit.

Engineers have developed a number of network devices that alleviate these difficulties. Many of these devices are not specific to Ethernet, but play roles in other network technologies as well.

 
Copyright © 1996 - 2020 Institute of Acoustics, Chinese Academy of Sciences
No. 21 North 4th Ring Road, Haidian District, 100190 Beijing, China
E-mail: ioa@mail.ioa.ac.cn